Water guard P 200 is a powder based cement additive to make waterproof mortar and concrete. It provides integral waterproofing of all concrete and cementitious-based systems. It also reduces permeability, absorption of efflorescence. It provides long term concrete and mortar durability. It is also a great shrinkage reducing agent for concrete and mortars. ADVANTAGES

• Provides permanent reduction in permeability
• Reduction in carbonation of concrete and mortar
• Improves resistance to sulphate chloride and chemical attack Enhances protection against frost attack
• Provides sound concrete for protection of reinforced steel Reduces bleed and segregation
• Reduces efflorescence and staining
• Ready to use, readily dispersed powder, supplied in convenient pre-weighed bags.

DOSAGE AND MIXING INSTRUCTIONS   The optimum dosage of Water Guard P 2DO to meet specific requirements should always be determined by trials using materials and conditions that will be experienced in use.  As a guide, normal dosages of Water Guard P 200 should be in the range 2 — 396 by weight of cement. For example 1kg Water Guard P 200 per bag/50kg of cement. To obtain maximum benefit it is recommended that the water cement ratio should not Exceed 0.40 with the correct dosage of Water Guard P 200 determined the required amount should be added to the mix, preferably with or immediately after cement addition. The concrete or mortar produced must be thoroughly  mixed until homogeneous. It is essential that good concreting and mortar making practice is perfbrmed and maintained at every stage of the application process. PACKAGING Water Guard P 200 is available in 2KG and 20 KG Packaging HEALTH AND SAFETY Water Guard P 200 is not regarded hazardous for transportation. Do not reuse the packaging and dispose them off as per local rules and regulations. Gloves and suitable masks can be worn during application. Please refer to the MSDS of the product for further health and safety information.