Damp Seal

Description

Damp Seal is an epoxy based dampness protective coating over masonry, cementitious surfaces, wood and metal. It is an ideal epoxy coating sealer for the protection of the surfaces against moisture and corrosion. Damp Seal is ideal for areas with rising dampness of water from natural ground level.

ADVANTAGES  

• Applicable over a variety of surfaces
• Easy to apply
• Ideal for rising dampness surfaces
• Corrosion resistant medium for metal

SURFACE PREPARATION
All loose particles from the surface shall be cleaned prior to application of Damp Seal. Excessive rust over metal should be removed either via mechanical means or by using appropriate rust removing chemicals. For reinforced steel, it is important to check the thickness of steel, Further reinforcement may be added if required. For areas of rising dampness it is essential that the paint that has been flaked off should be thoroughly removed using an appropriate paint remover or proper sanding. No paint should be left onto the surface of the cemented plaster prior to the application of Damp Seal.

PRODUCT PREPARATION
The Mixing container should be uncontaminated, non-corrosive and clean and free from any oil, dust or impurities that may cause the product to be mixed improperly. Mix part A with Part B and Part C in the appropriate ratio (as per the technical table) until a uniform mixture is obtained.

APPLICATION
It can be applied by spray, brush. roller or flow coating. The solution can be applied directly to the dry, porous building material, adjacent surfaces such as doors, windows, and other non-absorbent surfaces should be masked before spraying to avoid contact with the impregnating solution. Typically the solution is Brush or spray applied generously and evenly, and a second coat should be applied wile the first is still wet. Large surfaces are usually by flooding the surface with diluted solution. That is. the surface is sprayed with the solution and the solution is allowed to rundown the surface like a curtain. The solution can be also applied by dipping or brushing. The quantity of the solution to be applied varies greatly depending on the surface porosity. Preliminary evaluation should be conducted to determine the coverage requirements.

SHELF LIFE
06 months from date of manufacture when stored under warehouse conditions in original un-opened packing. Extreme temperature / humidity may reduce shelf life.

PACKAGING
Damp Seal is available in 1.25 KG Kits.
Part A: 650 ml     Part B: 350 ml     Part C: 250mI (Diluent).

HEALTH AND SAFETY
Damp Seal is regarded as non-hazardous fbr transportation. Do not reuse bags or containers and dispose them off as per local rules and regulations. Gloves and suitable masks can be worn during application. Please refer to the MSDS of the product for further health and safety information.